Climax Paint Protection Film is a product that has been developing in a completely different field and concept from the current popular coating. It has the softness of absorption and dispersion in the face of external impact and the abrasion resistance of surface scratch prevention. Moreover, the self-repair function is complete, and the film material has first expansion and contraction performance, can cope with the construction of compact car body curved lines, is a variety of high performance. The highly transparent protective film product, completely covering the car body, can effectively prevent scratches and stones from hurting your car.
Climax Paint Protection Film is a unique polyurethane film with excellent transparency and impact resistance. It uses a polymer polyurethane film layer of about 0.15mm and a unique adhesive of about 0.05mm acrylic resin to form a segment on the film itself. The special fluorine coating makes it possible to keep it clean for a more extended period. It is usually only necessary to wash the car to restore the cleaning. Also, the waterproof state of the beautiful small water droplets is achieved by the fluorine coating effect. Because of its automatic recovery, minor scratches naturally become less noticeable.
The special protective film completely covers the car body, prevents scratches and stones from hurting the car
The protective film construction process
Computer cutting precut model
Computer cutting precut model
高精度 Pre-Cut Patterns
車種ごとに豊富に用意されたプレカットデータを使用し 専用プロッターでカットしたフィルムをボディに貼るため高精度 な仕上がりとスピードが実現しました。
Cutting the film with a dedicated plotter and attaching it to the body using Percut Data pre-cut data for high-precision models and increased construction speed.
Computer cutting precut model
Treatment of painted surfaces with water-based grinding technology
The unique water-based abrasive is combined with Protech's functional membrane technology to extract the gloss of the paint and smooth the surface of the paint so that the (orange peel) is reduced, the gleam of the color is improved, and the ultra gloss is applied after the transparent film. Degree multiplied.
Computer cutting precut model
Treatment of painted surfaces with glass coating
By applying the glass coating agent to the vehicle body before application, damage to the paint film can minimize when the protective film is peeled off in the future, and too much glue stain is not left when peeling off.
Computer cutting precut model
Use a special Gel to install
During the construction, it is necessary to use a special Gel in a windless and dust-free environment and adhere it to the vehicle body by wet attaching. After drying, carefully check the details.
F A Q
Precautions :
-
After the construction of the CLIMAX Paint Protection Film transparent protective film, the maintenance method of the vehicle varies from person to person, so there is a problem of discoloration and transparency. We cannot guarantee that the structure of the paint layer cannot evaluate and whether the transparent film will cause the tearing operation. Peeling off the paint, we cannot guarantee.
-
We are not guaranteed to be close to the engine due to high temperature and other factors such as shrinkage or peeling of the film.
-
Problems such as chromatic aberration or different transparency caused by partial repair of the transparent film may exist. Please understand that the edge peeling problem caused by the flushing of the high-pressure water column during the car wash operation may exist. We do not provide a guarantee.
-
The primary purpose of the transparent film is to prevent flying stones and mosquitoes from causing damage or dirt to the car body, but we do not provide guarantees that all flying rocks of different sizes can effectively resist, and because of traffic accidents or damage caused by third parties, we also No guarantee
Is there a difference in appearance before and after the transparent protective film is attached?
The focus of research and development of protective film is to prevent the paint from being scratched or hit by foreign objects, so it is different from the feeling that the coated product is completely invisible after construction. However, if it is more than 3M, it is almost challenging to observe. It may not even come out ultimately. However, it is possible to have a slight discoloration after a long period (can be re-constructed and attached).
What is the relationship between the wax and the coating agent?
After the transparent film is applied, it is possible to use the coating agent or wax on the surface (it is recommended to finish the paint before attaching) ※ Before the transparent film is applied, the wax on the surface of the car body must be removed. ※ Pre-treatment of the transparent film construction area is strictly prohibited. Use a telluride-containing abrasive or wax.
What is the change between the film itself and the paint after a long period of construction?
In the development process, the material has controlled a minimum extent in terms of discoloration. Besides, the film itself has an anti-UV component, which makes it almost impossible to detect the stain of the paint surface compared to other commercially available products.